[Ltib] Installing ltib on VM machine with Fedora 20 x86

Discussion:

[Ltib] Installing ltib on VM machine with Fedora 20 x86_64

QuentinWanQiang YANG

2014-06-18 14:17:05 UTC

Hi all,

I've been using Ltib under Fedora 9. But the old Fedora 9 machine is about
to retire.

I am planning to move all existing projects from old Fedora 9 to Fedora 20
(64bits) running as VMware virtual machine.

Fedora 20 default installation is missing following packages during ltib
installation.
So I installed all these missing packages from bottom one to top one as
follows:

[***@fedora20 ltib]# yum install flex
[***@fedora20 ltib]# yum install ccache
[***@fedora20 ltib]# yum install perl-libwww-perl
[***@fedora20 ltib]# yum install bison
[***@fedora20 ltib]# yum install m4
[***@fedora20 ltib]# yum install ncurses-devel
[***@fedora20 ltib]# yum install rpm-build
[***@fedora20 ltib]# yum install zlib-devel
[***@fedora20 ltib]# yum install gcc-c++
[***@fedora20 ltib]# yum install gcc
[***@fedora20 ltib]# yum install cvs
[***@fedora20 DataPacV3]# yum install wget

Now, I stuck on this error when running either '$./ltib' or '$./ltib -m
config'

"
checking for socket in -lsocket... no
checking for compress in -lz... yes
checking for compress in -lz... (cached) yes
checking for gpg_err_init in -lgpg-error... no
checking for gcry_control in -lgcrypt... no
checking for libgnutls... no
configure: error: --with-ssl was given,* but GNUTLS is not available.*
error: Bad exit status from /home/q.yang/DataPacV3/ltib/tmp/rpm-tmp.85115
(%build)

RPM build errors:
Bad exit status from /home/q.yang/DataPacV3/ltib/tmp/rpm-tmp.85115
(%build)
Build time for wget-ssl: 64 seconds

Failed building wget-ssl
Died at ./ltib line 1492.
traceback:
main::build_host_rpms:1492
main::host_checks:1554
main:562

"

[***@fedora20 ltib]$ yum list gnutls
Loaded plugins: langpacks, refresh-packagekit
fedora/20/x86_64/metalink
| 3.7 kB 00:00:00
Installed Packages
gnutls.i686
3.1.25-1.fc20 @updates
gnutls.x86_64
3.1.25-1.fc20

Both 32bits and 64bits 'gnutls' packages are installed.
I have no idea why it's complaining ''.....GNUTLS is not available....."???

I tried to search all packages with 'gnutls' keyword:

[***@fedora20 ltib]$ yum search gnutls
Loaded plugins: langpacks, refresh-packagekit
============================= N/S matched: gnutls
==============================
python-gnutls.x86_64 : Python wrapper for the GNUTLS library
gnutls-c++.i686 : The C++ interface to GnuTLS
gnutls-c++.x86_64 : The C++ interface to GnuTLS
gnutls-dane.i686 : A DANE protocol implementation for GnuTLS
gnutls-dane.x86_64 : A DANE protocol implementation for GnuTLS
gnutls-devel.i686 : Development files for the gnutls package
gnutls-devel.x86_64 : Development files for the gnutls package
mingw32-gnutls.noarch : MinGW GnuTLS TLS/SSL encryption library
mingw64-gnutls.noarch : MinGW GnuTLS TLS/SSL encryption library
mod_gnutls.x86_64 : GnuTLS module for the Apache HTTP server
xmlsec1-gnutls.i686 : GNUTls crypto plugin for XML Security Library
xmlsec1-gnutls.x86_64 : GNUTls crypto plugin for XML Security Library
xmlsec1-gnutls-devel.i686 : GNUTls crypto plugin for XML Security Library
xmlsec1-gnutls-devel.x86_64 : GNUTls crypto plugin for XML Security Library
gnutls.i686 : A TLS protocol implementation
gnutls.x86_64 : A TLS protocol implementation
gnutls-utils.x86_64 : Command line tools for TLS protocol
libtasn1.i686 : The ASN.1 library used in GNUTLS
libtasn1.x86_64 : The ASN.1 library used in GNUTLS
rsyslog-gnutls.x86_64 : TLS protocol support for rsyslog

I suspect I might still need some other packages to be installed, which I
don't know yet except trying one by one.

Has anyone successfully done a fresh installation under Fedora 20?
Any suggestions or comments are much appreciated.

Regards,
Quentin

Mike Goins

2014-06-19 12:55:48 UTC

Permalink

On Wed, Jun 18, 2014 at 10:17 AM, QuentinWanQiang YANG

Post by QuentinWanQiang YANG
Hi all,
I've been using Ltib under Fedora 9. But the old Fedora 9 machine is about
to retire.
I am planning to move all existing projects from old Fedora 9 to Fedora 20
(64bits) running as VMware virtual machine.
Fedora 20 default installation is missing following packages during ltib
installation.
So I installed all these missing packages from bottom one to top one as
Now, I stuck on this error when running either '$./ltib' or '$./ltib -m
config'
"
checking for socket in -lsocket... no
checking for compress in -lz... yes
checking for compress in -lz... (cached) yes
checking for gpg_err_init in -lgpg-error... no
checking for gcry_control in -lgcrypt... no
checking for libgnutls... no
configure: error: --with-ssl was given, but GNUTLS is not available.
error: Bad exit status from /home/q.yang/DataPacV3/ltib/tmp/rpm-tmp.85115
(%build)
Bad exit status from /home/q.yang/DataPacV3/ltib/tmp/rpm-tmp.85115
(%build)
Build time for wget-ssl: 64 seconds
Failed building wget-ssl
Died at ./ltib line 1492.
main::build_host_rpms:1492
main::host_checks:1554
main:562
"
Loaded plugins: langpacks, refresh-packagekit
fedora/20/x86_64/metalink
| 3.7 kB 00:00:00
Installed Packages
gnutls.i686
gnutls.x86_64
3.1.25-1.fc20
Both 32bits and 64bits 'gnutls' packages are installed.
I have no idea why it's complaining ''.....GNUTLS is not available....."???
Loaded plugins: langpacks, refresh-packagekit
============================= N/S matched: gnutls
==============================
python-gnutls.x86_64 : Python wrapper for the GNUTLS library
gnutls-c++.i686 : The C++ interface to GnuTLS
gnutls-c++.x86_64 : The C++ interface to GnuTLS
gnutls-dane.i686 : A DANE protocol implementation for GnuTLS
gnutls-dane.x86_64 : A DANE protocol implementation for GnuTLS
gnutls-devel.i686 : Development files for the gnutls package
gnutls-devel.x86_64 : Development files for the gnutls package
mingw32-gnutls.noarch : MinGW GnuTLS TLS/SSL encryption library
mingw64-gnutls.noarch : MinGW GnuTLS TLS/SSL encryption library
mod_gnutls.x86_64 : GnuTLS module for the Apache HTTP server
xmlsec1-gnutls.i686 : GNUTls crypto plugin for XML Security Library
xmlsec1-gnutls.x86_64 : GNUTls crypto plugin for XML Security Library
xmlsec1-gnutls-devel.i686 : GNUTls crypto plugin for XML Security Library
xmlsec1-gnutls-devel.x86_64 : GNUTls crypto plugin for XML Security Library
gnutls.i686 : A TLS protocol implementation
gnutls.x86_64 : A TLS protocol implementation
gnutls-utils.x86_64 : Command line tools for TLS protocol
libtasn1.i686 : The ASN.1 library used in GNUTLS
libtasn1.x86_64 : The ASN.1 library used in GNUTLS
rsyslog-gnutls.x86_64 : TLS protocol support for rsyslog
I suspect I might still need some other packages to be installed, which I
don't know yet except trying one by one.
Has anyone successfully done a fresh installation under Fedora 20?
Any suggestions or comments are much appreciated.
Regards,
Quentin

The error message from that source config looks misleading. Usually
--with-ssl indicates libssl, so look for a libssl-dev in your package
manager to install.

Post by QuentinWanQiang YANG
_______________________________________________
LTIB home page: http://ltib.org
Ltib mailing list
https://lists.nongnu.org/mailman/listinfo/ltib

QuentinWanQiang YANG

2014-06-20 02:22:03 UTC

Permalink

Hi Mike,

Unfortunately, installing 'SSL development libraries' didn't help.

Correct me if I am wrong.
'libssl-dev' seems is package name used in ubuntu.
I think the corresponding one under fedora is 'openssl'

I installed 'openssl-devel' , but still having the same error as mentioned
in previous email.
[***@fedora20 ltib]# yum install openssl-devel
[***@fedora20 ltib]# yum install openssl-devel.i686

[***@fedora20 ltib]$ yum list openssl*
Loaded plugins: langpacks, refresh-packagekit
Installed Packages
openssl.x86_64 1:1.0.1e-38.fc20
@updates
openssl-devel.i686 1:1.0.1e-38.fc20
@updates
openssl-devel.x86_64 1:1.0.1e-38.fc20
@updates
openssl-libs.i686 1:1.0.1e-38.fc20
@updates
openssl-libs.x86_64 1:1.0.1e-38.fc20
@updates
Available Packages
openssl-perl.x86_64 1:1.0.1e-38.fc20
updates
openssl-static.i686 1:1.0.1e-38.fc20
updates
openssl-static.x86_64 1:1.0.1e-38.fc20
updates

I'll keep on looking for the missing packages.Thanks again for your reply.

Regards,
Quentin

Post by Mike Goins
On Wed, Jun 18, 2014 at 10:17 AM, QuentinWanQiang YANG

Post by QuentinWanQiang YANG
Hi all,
I've been using Ltib under Fedora 9. But the old Fedora 9 machine is

about

Post by QuentinWanQiang YANG
to retire.
I am planning to move all existing projects from old Fedora 9 to Fedora

Post by QuentinWanQiang YANG
(64bits) running as VMware virtual machine.
Fedora 20 default installation is missing following packages during ltib
installation.
So I installed all these missing packages from bottom one to top one as
Now, I stuck on this error when running either '$./ltib' or '$./ltib -m
config'
"
checking for socket in -lsocket... no
checking for compress in -lz... yes
checking for compress in -lz... (cached) yes
checking for gpg_err_init in -lgpg-error... no
checking for gcry_control in -lgcrypt... no
checking for libgnutls... no
configure: error: --with-ssl was given, but GNUTLS is not available.
error: Bad exit status from /home/q.yang/DataPacV3/ltib/tmp/rpm-tmp.85115
(%build)
Bad exit status from /home/q.yang/DataPacV3/ltib/tmp/rpm-tmp.85115
(%build)
Build time for wget-ssl: 64 seconds
Failed building wget-ssl
Died at ./ltib line 1492.
main::build_host_rpms:1492
main::host_checks:1554
main:562
"
Loaded plugins: langpacks, refresh-packagekit
fedora/20/x86_64/metalink
| 3.7 kB 00:00:00
Installed Packages
gnutls.i686
3.1.25-1.fc20

@updates

Post by QuentinWanQiang YANG
gnutls.x86_64
3.1.25-1.fc20
Both 32bits and 64bits 'gnutls' packages are installed.
I have no idea why it's complaining ''.....GNUTLS is not

available....."???

Post by QuentinWanQiang YANG
Loaded plugins: langpacks, refresh-packagekit
============================= N/S matched: gnutls
==============================
python-gnutls.x86_64 : Python wrapper for the GNUTLS library
gnutls-c++.i686 : The C++ interface to GnuTLS
gnutls-c++.x86_64 : The C++ interface to GnuTLS
gnutls-dane.i686 : A DANE protocol implementation for GnuTLS
gnutls-dane.x86_64 : A DANE protocol implementation for GnuTLS
gnutls-devel.i686 : Development files for the gnutls package
gnutls-devel.x86_64 : Development files for the gnutls package
mingw32-gnutls.noarch : MinGW GnuTLS TLS/SSL encryption library
mingw64-gnutls.noarch : MinGW GnuTLS TLS/SSL encryption library
mod_gnutls.x86_64 : GnuTLS module for the Apache HTTP server
xmlsec1-gnutls.i686 : GNUTls crypto plugin for XML Security Library
xmlsec1-gnutls.x86_64 : GNUTls crypto plugin for XML Security Library
xmlsec1-gnutls-devel.i686 : GNUTls crypto plugin for XML Security Library
xmlsec1-gnutls-devel.x86_64 : GNUTls crypto plugin for XML Security

Library

Post by QuentinWanQiang YANG
gnutls.i686 : A TLS protocol implementation
gnutls.x86_64 : A TLS protocol implementation
gnutls-utils.x86_64 : Command line tools for TLS protocol
libtasn1.i686 : The ASN.1 library used in GNUTLS
libtasn1.x86_64 : The ASN.1 library used in GNUTLS
rsyslog-gnutls.x86_64 : TLS protocol support for rsyslog
I suspect I might still need some other packages to be installed, which I
don't know yet except trying one by one.
Has anyone successfully done a fresh installation under Fedora 20?
Any suggestions or comments are much appreciated.
Regards,
Quentin

The error message from that source config looks misleading. Usually
--with-ssl indicates libssl, so look for a libssl-dev in your package
manager to install.

Post by QuentinWanQiang YANG
_______________________________________________
LTIB home page: http://ltib.org
Ltib mailing list
https://lists.nongnu.org/mailman/listinfo/ltib

_______________________________________________
LTIB home page: http://ltib.org
Ltib mailing list
https://lists.nongnu.org/mailman/listinfo/ltib

Stuart Hughes

2014-06-20 08:07:22 UTC

Permalink

Hi Quentin,

Try installing gnutls-devel

Regards, Stuart

Post by QuentinWanQiang YANG
Hi Mike,
Unfortunately, installing 'SSL development libraries' didn't help.
Correct me if I am wrong.
'libssl-dev' seems is package name used in ubuntu.
I think the corresponding one under fedora is 'openssl'
I installed 'openssl-devel' , but still having the same error as
mentioned in previous email.
Loaded plugins: langpacks, refresh-packagekit
Installed Packages
openssl.x86_64 1:1.0.1e-38.fc20
@updates
openssl-devel.i686 1:1.0.1e-38.fc20
@updates
openssl-devel.x86_64 1:1.0.1e-38.fc20
@updates
openssl-libs.i686 1:1.0.1e-38.fc20
@updates
openssl-libs.x86_64 1:1.0.1e-38.fc20
@updates
Available Packages
openssl-perl.x86_64 1:1.0.1e-38.fc20
updates
openssl-static.i686 1:1.0.1e-38.fc20
updates
openssl-static.x86_64 1:1.0.1e-38.fc20
updates
I'll keep on looking for the missing packages.Thanks again for your reply.
Regards,
Quentin
On Thu, Jun 19, 2014 at 10:55 PM, Mike Goins
On Wed, Jun 18, 2014 at 10:17 AM, QuentinWanQiang YANG

Post by QuentinWanQiang YANG
Hi all,
I've been using Ltib under Fedora 9. But the old Fedora 9

machine is about

Post by QuentinWanQiang YANG
to retire.
I am planning to move all existing projects from old Fedora 9 to

Fedora 20

Post by QuentinWanQiang YANG
(64bits) running as VMware virtual machine.
Fedora 20 default installation is missing following packages

during ltib

Post by QuentinWanQiang YANG
installation.
So I installed all these missing packages from bottom one to top

one as

Post by QuentinWanQiang YANG
Now, I stuck on this error when running either '$./ltib' or

'$./ltib -m

Post by QuentinWanQiang YANG
config'
"
checking for socket in -lsocket... no
checking for compress in -lz... yes
checking for compress in -lz... (cached) yes
checking for gpg_err_init in -lgpg-error... no
checking for gcry_control in -lgcrypt... no
checking for libgnutls... no
configure: error: --with-ssl was given, but GNUTLS is not available.
error: Bad exit status from

/home/q.yang/DataPacV3/ltib/tmp/rpm-tmp.85115

Post by QuentinWanQiang YANG
(%build)
Bad exit status from

/home/q.yang/DataPacV3/ltib/tmp/rpm-tmp.85115

Post by QuentinWanQiang YANG
(%build)
Build time for wget-ssl: 64 seconds
Failed building wget-ssl
Died at ./ltib line 1492.
main::build_host_rpms:1492
main::host_checks:1554
main:562
"
Loaded plugins: langpacks, refresh-packagekit
fedora/20/x86_64/metalink
| 3.7 kB 00:00:00
Installed Packages
gnutls.i686
gnutls.x86_64
3.1.25-1.fc20
Both 32bits and 64bits 'gnutls' packages are installed.
I have no idea why it's complaining ''.....GNUTLS is not

available....."???

Library

Post by QuentinWanQiang YANG
xmlsec1-gnutls-devel.i686 : GNUTls crypto plugin for XML

Security Library

Post by QuentinWanQiang YANG
xmlsec1-gnutls-devel.x86_64 : GNUTls crypto plugin for XML

Security Library

installed, which I

Post by QuentinWanQiang YANG
don't know yet except trying one by one.
Has anyone successfully done a fresh installation under Fedora 20?
Any suggestions or comments are much appreciated.
Regards,
Quentin

The error message from that source config looks misleading. Usually
--with-ssl indicates libssl, so look for a libssl-dev in your package
manager to install.

Post by QuentinWanQiang YANG
_______________________________________________
LTIB home page: http://ltib.org
Ltib mailing list
https://lists.nongnu.org/mailman/listinfo/ltib

_______________________________________________
LTIB home page: http://ltib.org
Ltib mailing list
https://lists.nongnu.org/mailman/listinfo/ltib
_______________________________________________
LTIB home page: http://ltib.org
Ltib mailing list
https://lists.nongnu.org/mailman/listinfo/ltib

QuentinWanQiang YANG

2014-06-22 08:57:16 UTC

Permalink

Hi Stuart,

Thanks for the reply. No luck after installing 'gnutls-devel'. But the
error message is different now. Failed to compile.

make[3]: Leaving directory `/opt/ltib/usr/src/rpm/BUILD/wget-1.14/src'
make[2]: Leaving directory `/opt/ltib/usr/src/rpm/BUILD/wget-1.14/src'
Making all in doc
make[2]: Entering directory `/opt/ltib/usr/src/rpm/BUILD/wget-1.14/doc'
./texi2pod.pl -D VERSION="1.14" ./wget.texi wget.pod
/usr/bin/pod2man --center="GNU Wget" --release="GNU Wget 1.14" wget.pod >
wget.1
wget.pod around line 2105: Expected text after =item, not a number
wget.pod around line 2110: Expected text after =item, not a number
wget.pod around line 2116: Expected text after =item, not a number
wget.pod around line 2121: Expected text after =item, not a number
wget.pod around line 2126: Expected text after =item, not a number
wget.pod around line 2131: Expected text after =item, not a number
wget.pod around line 2136: Expected text after =item, not a number
wget.pod around line 2141: Expected text after =item, not a number
POD document had syntax errors at /usr/bin/pod2man line 69.
make[2]: *** [wget.1] Error 255
make[2]: Leaving directory `/opt/ltib/usr/src/rpm/BUILD/wget-1.14/doc'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/opt/ltib/usr/src/rpm/BUILD/wget-1.14'
make: *** [all] Error 2
error: Bad exit status from /home/q.yang/DataPacV3/ltib/tmp/rpm-tmp.53736
(%build)

RPM build errors:
Bad exit status from /home/q.yang/DataPacV3/ltib/tmp/rpm-tmp.53736
(%build)
Build time for wget-ssl: 84 seconds

Failed building wget-ssl
Died at ./ltib line 1492.
traceback:
main::build_host_rpms:1492
main::host_checks:1554
main:562

[***@fedora20 ltib]$ yum list gnutls*
Loaded plugins: langpacks, refresh-packagekit
Installed Packages
gnutls.i686 3.1.25-1.fc20
@updates
gnutls.x86_64 3.1.25-1.fc20
@updates
gnutls-c++.x86_64 3.1.25-1.fc20
@updates
gnutls-dane.x86_64 3.1.25-1.fc20
@updates
gnutls-devel.x86_64 3.1.25-1.fc20
@updates
gnutls-utils.x86_64 3.1.25-1.fc20
@updates
Available Packages
gnutls-c++.i686 3.1.25-1.fc20
updates
gnutls-dane.i686 3.1.25-1.fc20
updates
gnutls-devel.i686 3.1.25-1.fc20
updates

MY LINUX KERNEL VERSION:
[***@fedora20 ltib]$ uname -a
Linux fedora20 3.14.6-200.fc20.x86_64 #1 SMP Sun Jun 8 01:21:56 UTC 2014
x86_64 x86_64 x86_64 GNU/Linux

COULD NO LONGER REPRODUCE PREVIOUS ERROR.
Another thing I don't understand is after I uninstall packages that didn't
help, I could not get the previous error.
The error is now always "....POD document had syntax errors at
/usr/bin/pod2man line 69....."

[***@fedora20 ltib]# yum erase gnutls-devel
[***@fedora20 ltib]$ yum list gnutls*
Loaded plugins: langpacks, refresh-packagekit
Installed Packages
gnutls.x86_64 3.1.25-1.fc20
@updates
gnutls-c++.x86_64 3.1.25-1.fc20
@updates
gnutls-dane.x86_64 3.1.25-1.fc20
@updates
Available Packages
gnutls.i686 3.1.25-1.fc20
updates
gnutls-c++.i686 3.1.25-1.fc20
updates
gnutls-dane.i686 3.1.25-1.fc20
updates
gnutls-devel.i686 3.1.25-1.fc20
updates
gnutls-devel.x86_64 3.1.25-1.fc20
updates
gnutls-utils.x86_64 3.1.25-1.fc20

[***@fedora20 ltib]# rm -rf /opt/ltib/usr/src/rpm/BUILD/wget-1.14
[***@fedora20 ltib]$ ./ltib

wget.pod around line 2116: Expected text after =item, not a number
wget.pod around line 2121: Expected text after =item, not a number
wget.pod around line 2126: Expected text after =item, not a number
wget.pod around line 2131: Expected text after =item, not a number
wget.pod around line 2136: Expected text after =item, not a number
wget.pod around line 2141: Expected text after =item, not a number
POD document had syntax errors at /usr/bin/pod2man line 69.
make[2]: *** [wget.1] Error 255
make[2]: Leaving directory `/opt/ltib/usr/src/rpm/BUILD/wget-1.14/doc'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/opt/ltib/usr/src/rpm/BUILD/wget-1.14'
make: *** [all] Error 2
error: Bad exit status from /home/q.yang/DataPacV3/ltib/tmp/rpm-tmp.48226
(%build)

RPM build errors:
Bad exit status from /home/q.yang/DataPacV3/ltib/tmp/rpm-tmp.48226
(%build)
Build time for wget-ssl: 89 seconds

Failed building wget-ssl
Died at ./ltib line 1492.
traceback:
main::build_host_rpms:1492
main::host_checks:1554
main:562

Started: Sun Jun 22 18:24:34 2014
Ended: Sun Jun 22 18:26:04 2014
Elapsed: 90 seconds

VERSION : 13.2.1
CVS_VERSION : $Revision: 1.93 $ (Savannah)
PLATFORM : host
GNUTARCH : x86_64
TOOLCHAIN :
TOOLCHAIN_CFLAGS :

These packages failed to build:
wget-ssl

Build Failed

SOME WORK DONE ON A FEDORA9 VM MACHINE
While tackling with ltib installation on Fedora 20,I created a Fedora 9 VM
machine, which doesn't have to run on the old PC and can be easily ported
to any new PC.

In fact, after having solved some missing packages issues, eventually same
error as in Fedora20 happened again on this fresh ltib installation with
Fedora9 VM.

"
...........
checking for libgnutls... no
configure: error: --with-ssl was given,* but GNUTLS is not available*
*...........*
"

Comparing ltib on Fedora9 VM with ltib on old Fedora9 machine, I noticed
that new ltib installation created two files under
'ltib/dist/lfs-5.1/wget/' i.e., 'wget.spec', 'wget-ssl.spec'. Whereas on
old Fedora9 machine, there was only one file 'wget.spec'.

As suggested by this link 'https://community.freescale.com/thread/289198',
as a temporary workaround. I added â--without-sslâ '' at line â./configureâ
in 'wget-ssl.spec' file.

Fresh 'ltib' installation with Fedora9 VM machine successfully started up
and populated that familiar blue configuration screen. : - )

[ Side notes: The new ltib installation is always using 'wget-ssl.spec'. I
don't know how to get it to use 'wget.spec' file.So I edit 'wget-ssl.spec'
file directly.
''--without-ssl" was already there in 'wget.spec' file on old Fedora9
machine. Means on old Fedora9 machine. Wget was not able to support https
link with wget. ]

Regards,
Quentin

Post by Stuart Hughes
Hi Quentin,
Try installing gnutls-devel
Regards, Stuart
Hi Mike,
Unfortunately, installing 'SSL development libraries' didn't help.
Correct me if I am wrong.
'libssl-dev' seems is package name used in ubuntu.
I think the corresponding one under fedora is 'openssl'
I installed 'openssl-devel' , but still having the same error as
mentioned in previous email.
Loaded plugins: langpacks, refresh-packagekit
Installed Packages
openssl.x86_64 1:1.0.1e-38.fc20
@updates
openssl-devel.i686 1:1.0.1e-38.fc20
@updates
openssl-devel.x86_64 1:1.0.1e-38.fc20
@updates
openssl-libs.i686 1:1.0.1e-38.fc20
@updates
openssl-libs.x86_64 1:1.0.1e-38.fc20
@updates
Available Packages
openssl-perl.x86_64 1:1.0.1e-38.fc20
updates
openssl-static.i686 1:1.0.1e-38.fc20
updates
openssl-static.x86_64 1:1.0.1e-38.fc20
updates
I'll keep on looking for the missing packages.Thanks again for your reply.
Regards,
Quentin

Post by Mike Goins
On Wed, Jun 18, 2014 at 10:17 AM, QuentinWanQiang YANG

Post by QuentinWanQiang YANG
Hi all,
I've been using Ltib under Fedora 9. But the old Fedora 9 machine is

about

Post by QuentinWanQiang YANG
to retire.
I am planning to move all existing projects from old Fedora 9 to Fedora

/home/q.yang/DataPacV3/ltib/tmp/rpm-tmp.85115

Post by QuentinWanQiang YANG
(%build)
Bad exit status from /home/q.yang/DataPacV3/ltib/tmp/rpm-tmp.85115
(%build)
Build time for wget-ssl: 64 seconds
Failed building wget-ssl
Died at ./ltib line 1492.
main::build_host_rpms:1492
main::host_checks:1554
main:562
"
Loaded plugins: langpacks, refresh-packagekit
fedora/20/x86_64/metalink
| 3.7 kB 00:00:00
Installed Packages
gnutls.i686
3.1.25-1.fc20

@updates

Post by QuentinWanQiang YANG
gnutls.x86_64
3.1.25-1.fc20
Both 32bits and 64bits 'gnutls' packages are installed.
I have no idea why it's complaining ''.....GNUTLS is not

available....."???

Library

Post by QuentinWanQiang YANG
xmlsec1-gnutls-devel.x86_64 : GNUTls crypto plugin for XML Security

Library

The error message from that source config looks misleading. Usually
--with-ssl indicates libssl, so look for a libssl-dev in your package
manager to install.

Post by QuentinWanQiang YANG
_______________________________________________
LTIB home page: http://ltib.org
Ltib mailing list
https://lists.nongnu.org/mailman/listinfo/ltib

_______________________________________________
LTIB home page: http://ltib.org
Ltib mailing list
https://lists.nongnu.org/mailman/listinfo/ltib

_______________________________________________
LTIB home page: http://ltib.org